Macromatic Industrial Control & Monitoring Products

ARP Series Duplexor


Features
  • For Duplex Control
  • Control Voltages of 12, 24, 120 & 240VAC
  • Three 10A output contact configurations: SPDT, DPDT, or DPDT Cross-Wired
  • Optional low profile selector switch to lock in one sequence
  • 2 LED's indicate relay status
Enclosure Style Plug-in case utilizing industry-standard 8 & 11 pin octal sockets
Configuration/
Contact Rating
  • SPDT, DPDT & DPDT Cross-Wired
  • 10A @ 240V AC/30V DC, 1/2HP @ 120/240V AC (N.O.), 1/3HP @ 120/240V AC (N.C.)
Approvals       ur.gif  CSA_Logo.gif  CE_Logo.gif  UL-socket.jpg    UL File #E109466
Technical Documentation

Duplex Alternating Relays are used in special applications where the optimization of load usage is required by equalizing the run time of two loads. This alternating action is initiated by a control switch, such as a float switch, manual switch&, timing relay, pressure switch, or other isolated contact. Each time the initiating switch is opened, the output relay contacts will change state, thus alternating the two loads. Two LED indicators show the status of the output relay.

Cross-wired alternating relays are also used where additional capacity is required in case of excess load requirements. Not only will this version alternate between two loads, but it also allows both loads to run simultaneously when the lead and lag switches are closed, thus providing a way for both loads to operate when running just one does not provide enough capacity.

Duplex Alternating Relays are available in three output configurations: SPDT, DPDT and DPDT cross-wired. See KnowledgeBase Article for more information.

Each version is available with an optional three position selector switch. This allows the unit to alternate the two loads as normal, or lock the relay to one load or the other. By locking the Alternating Relay to one load, the other load can be removed for service without rewiring the first load for continuous operation. In addition, on cross-wired versions, locking a load to always operate first allows the user to balance the run time of both loads if one load has fewer hours of operation than the other. The selector switch has a low profile to prevent any accidental changes in status.


ARP120A6R

With Switch

ARP120A6

Without Switch

ARP120A6R-front

Top-Mounted Switch

Back to Product Line Summary         Home


ALTERNATING RELAYS