TCF-E Series

Inner Door Mounting

Works with Pumps using Float Type Leakage Detector

Works with Pumps using Float Type Leakage Detector

Flange-enclosure designed for deadfront door-mounting

Flange-enclosure designed for deadfront door-mounting

Features
  • Monitors Submersible Pumps for Over Temperature & Seal Leakage
  • Works with Pumps using Float Type Leakage Detector
  • Auto & Manual Reset for Over Temperature
  • Low-Profile Adjustment Switch & Reset Button
  • Full Status Indication on Top of Unit for Easy Troubleshooting
  • 11 Pin Back-Mounted Socket Provided with Relay
Enclosure Style Flange-enclosure designed for deadfront door-mounting
Configuration/
Contact Rating
  • 7A SPDT & SPNC
  • 7A @ 240V AC/7A @ 28V DC
Approvals c-ur-us.jpg  UL File #E109466
Technical Documentation

Operation:
Two wires from the Over Temp/Seal Leakage relay are connected to a N.C. thermal switch in the windings of the pump motor to monitor for overheating. A low-voltage DC signal is applied to check the status of the thermal switch.  Two additional wires are connected to a N.C. float switch in the Leakage Sensor.  A separate low-voltage DC signal is applied to check the status of the Leakage Sensor. These products have isolated output contact relays, one for over temperature and one for seal leakage. 

With input voltage applied, normal temperature condition (thermal switch closed) and no seal leakage (Leakage Sensor contact closed), both the over temperature relay and the seal leakage relay are energized. The TEMP & SEAL LEDs are both Green, indicating normal conditions and input voltage applied. 

When the motor temperature rises and the N.C. thermal switch opens, the over temperature relay is de-energized, opening a contact that had been closed and turning off the pump contactor. The TEMP LED turns Red. If the over temperature condition is cleared, the unit will reset based on the setting of the Over Temp switch.  In the AUTO mode, the unit will reset automatically.  In the MANUAL mode, the Over Temp Reset button must be pushed to clear the alarm and reset the relay.

If the seal starts to leak, contaminating fluid enters the pump motor cavity. The contact in the Leakage Sensor will open and the seal leakage relay is de-energized, reclosing a contact that was opened and providing an alarm indication of a leaking seal. The SEAL LED turns Red.

Use this tool to build your catalog number by selecting features and options for a base product from this family.

Begin by making your first selection...

Macromatic's Seal Leakage and Temperature Relays Knowledge Base contains general and technical industry articles to help you learn more about Seal Leak and Temperature Relays.

Works with Pumps using Float Type Leakage Detector

Works with Pumps using Float Type Leakage Detector

Flange-enclosure designed for deadfront door-mounting

Flange-enclosure designed for deadfront door-mounting

Sign Up For Macromatic's Newsletter

©2018 Macromatic Industrial Controls, Inc.

W134N5345 Campbell Drive
Menomonee Falls, WI 53051

800-238-7474 • 262-781-3366

Rep Login | Newsletter Sign Up | Articles | Employment | Privacy Policy | Sitemap
Knowledgebase General | Alternating Relays | Current Sensing Relays | Liquid Level Control Relays | Seal Leak Relays | Three-Phase Monitor Relays | Time Delay Relays | Voltage Monitor Relays