TCP Series

Plug-in

Protects Against Seal Leakage & Overheating

Protects Against Seal Leakage & Overheating

Industry-Standard 11 Pin Plug-in Mounting

Industry-Standard 11 Pin Plug-in Mounting

Dual Color LED w/Clear Status Indication

Dual Color LED w/Clear Status Indication

Features
  • Monitors Submersible Pumps for Over Temperature & Seal Leakage
  • Auto Reset for Over Temperature
  • Two Adjustable Sensitivity Ranges for Seal Leakage
  • Low-Profile Adjustment Knob
  • Full status indication on top of unit for easy troubleshooting
Enclosure Style Plug-in case utilizing industry-standard 11 pin octal sockets
Configuration/
Contact Rating
  • SPDT
  • 7A @ 240V AC/7A @ 28V DC
Approvals c-ur-us.jpg  UL File #E109466
Technical Documentation

Operation:

Two wires are connected to a resistive-sensing probe & common in the seal cavity to monitor for seal leakage. Two additional wires are connected to a N.C. thermal switch in the windings of the pump motor to monitor for overheating. The product has isolated output contact relays, one for seal leak & one for temperature. The temperature set-point will be fixed at 5K ohms. Two adjustable seal leak sensitivity ranges are available: 4.7K-100K ohms and 1K-250K ohms.

With input voltage applied, normal temperature condition (thermal switch closed) and no seal leak, the isolated temperature relay is energized and the isolated seal leak relay is de-energized. Both LED's are Green. When the motor temperature rises and the N.C. thermal switch opens, the temperature relay is de-energized, opening a contact that had been closed and turning off the pump contactor. The TEMP LED turns Red. If the seal starts to leak, contaminating fluid enters the seal cavity. This lowers the resistance between the internal probe & the common connection. When the resistance drops below the user-adjustable sensitivity set-point of the relay, the seal leak relay energizes and closes a contact, which can be used to give an alarm indication of a leaking seal. The LEAK LED turns Red. These products will automatically reset when the fault condition clears.

Use this tool to build your catalog number by selecting features and options for a base product from this family.

Begin by making your first selection...

Macromatic's Seal Leakage and Temperature Relays Knowledge Base contains general and technical industry articles to help you learn more about Seal Leak and Temperature Relays.

Protects Against Seal Leakage & Overheating

Protects Against Seal Leakage & Overheating

Industry-Standard 11 Pin Plug-in Mounting

Industry-Standard 11 Pin Plug-in Mounting

Dual Color LED w/Clear Status Indication

Dual Color LED w/Clear Status Indication

Sign Up For Macromatic's Newsletter

©2018 Macromatic Industrial Controls, Inc.

W134N5345 Campbell Drive
Menomonee Falls, WI 53051

800-238-7474 • 262-781-3366

Rep Login | Newsletter Sign Up | Articles | Employment | Privacy Policy | Sitemap
Knowledgebase General | Alternating Relays | Current Sensing Relays | Liquid Level Control Relays | Seal Leak Relays | Three-Phase Monitor Relays | Time Delay Relays | Voltage Monitor Relays