Intrinsically Safe Barrier Relays

Intrinsically Safe Barrier Relays

Intrinsically Safe Barrier Relays protect hazardous location circuits and control loads without additional relays or contactors. IS circuits operate at low energy levels that cannot ignite potentially explosives atmospheres. In the event of a fault condition, these Intrinsically Safe Barrier Relays prevent excess voltage and current from reaching the hazardous area.

Circuit Protection and Control in One Compact Device

Macromatic's Intrinsically Safe Barrier Relays are approved for use in these Hazardous Locations: Class I, Div 1 (Zones 0 and 1 Canada), Groups A, B, C, D; Class II, Div 1 (Zones 20 and 21 Canada), Group E, F, G; Class III, Div 1. Choose from three enclosure styles:

4-CHANNEL, 60 MM WIDE

ISD Series Barrier Relays control up to four loads. Models are available to apply time delay and logic selection independently to each channel. These relays mount on 35 mm DIN-rail or can be panel mounted.

product on white

1-CHANNEL, 17.5 MM WIDE

ISE Series Barrier Relays control a single load with a single input from the hazardous area These relays mount on 35 mm DIN-rail or can be panel mounted. Choose standard or inverse logic.

1-CHANNEL, PLUG-IN

ISP Series Barrier Relays, with an 8-pin configuration with included socket, mount on 35 mm DIN-rail or can be panel mounted. Note that the ISP Series is not approved for use in hazardous zones in Canada.

  • Function: Operating configuration independently applied to each channel
  • Control Voltage: Universal: 102-132V AC & 10-125V DC
  • Number Of Channels: 4-channel
  • Enclosure Style: 60mm DIN-Rail
  • Standard Modifications: None
$611.26
  • Function: Operating configuration applied to all channels
  • Control Voltage: Universal: 102-132V AC & 10-125V DC
  • Number Of Channels: 4-channel
  • Enclosure Style: 60mm DIN-Rail
  • Standard Modifications: None
$514.22
  • Function: Operating configuration applied to single channel relays
  • Control Voltage: Universal: 102-132V AC & 10-125V DC
  • Number Of Channels: 1-channel
  • Enclosure Style: 17.5mm DIN-Rail
  • Standard Modifications: None
$156.29
  • Function: Operating configuration applied to single channel relays
  • Control Voltage: Universal: 102-132V AC & 10-125V DC
  • Number Of Channels: 1-channel
  • Enclosure Style: 17.5mm DIN-Rail
  • Standard Modifications: Inverted Operation
$156.28
  • Function: Operating configuration applied to single channel relays
  • Control Voltage: 120V AC
  • Number Of Channels: 1-channel
  • Enclosure Style: Plug-in
  • Standard Modifications: None
$230.77

Frequently Asked Questions About Intrinsically Safe Barrier Relays

Knowledge Base Articles

Technical reports to answer your questions